How hot is your PC running, and why is it important? You can find the answer in one of two ways. You can take the liberty to download a device that will tell you exactly what you want to know, or you can use a hardware monitor.
Keeping your PC cool is as important as keeping water in the radiator. When they fry, it may mean that a whole new machine is needed. Let’s avoid this problem together.
Windows apps
You do not need to go to the kitty-gritty of UEFI / BIOS to measure the temperature of your CPU. Monitoring applications use the same physical temperature sensor in your system as your UEFI / BIOS, but it can be accessed correctly through Windows. This means that you can watch it without restarting and you can also force your CPU to do some hard work so that you can see how hot it gets when it is working hard.
There are many first and third party apps out there that you can use to get quick and easy access to the temperature of your CPU, as well as much more information. Some of them can be a bit heavy, but if you just want to check your CPU temperature, our favorite listed below will show you the right one.
Intel xtu
If you have an Intel Core processor, Intel’s Extreme Tuning Utility (XTU) is arguably the best way to test how hot your processor is running. Although primarily designed as an overclocking tool, the Intel XTU comes with several built-in monitoring functions.
Phase 1: To find out how hot your CPU is, while running it, download the program from Intel’s download center and install it like you would any application.
Phase 2: When booting it, you will be presented with a lot of information, but in the lower panel of the main screen, you will see some important information about your CPU. Is most important for this particular guide Package temperature And related graphs. That is your CPU temperature.
step 3: You can also see how hard your CPU is working according to its CPU utilization percentage. The higher your CPU has to do. If you want to see how this happens under stress, you can use XTU’s built-in CPU benchmark under the corresponding left-hand tab.
AMD Ryzen Master
Phase 1: If you are running one of AMD’s new Ryzen processors, you can use AMD’s own Ryzen master tool. It works similarly to Intel’s XTU, but for Ryzen chips instead. To install the program go to its download center.
Phase 2: Along with its core clock-tweaking capabilities, it also has a CPU temperature monitor which you can see on the left. Like the XTU, there is also a graph that can plot the temperature of your CPU over time, even breaking it down to the core, so you can see if the individual cores are warmer than others Have been.
step 3: The Ryzen Master Tool can also give you average and peak readings, allowing you to see how hot your CPU gets over a long period of time, which is very important for people with daytime or external forces affecting the CPU temperature. that’s good.
HWMonitor
A classic PC-monitoring solution, HWMonitor can tell you everything about the various components of your system, from the voltages they need to the temperature to run. It does not feature any type of overclocking tool, and its interface is bare-bones, but it is clean, lightweight, and easy to parse at a glance. Download from here
The HWMmonitor Pro version, available for free with advertisements, has expanded capabilities and allows you to monitor up to 10 devices, including Android devices. This is an ideal pick if you want to monitor temperature on the things you use (and avoid accidentally damaging your smartphone’s battery from too much heat).
Hardware monitors
If none of the above methods are what you are looking for when it comes to checking your CPU temperature, you can always opt for a hardware monitor. These typically come as part of fan controllers that slot into one of the optical drive ports on desktop systems. They sometimes use temperature sensors on your ship, but many come with their own wired thermometers that give you additional information about how hot your CPU is heating up.
pay attention: These hardware monitors require some degree of installation, so be prepared to open your PC to fit them, or pay by a professional. For DIY PC building tips, check out our guide to making your first PC.
Here are some hardware monitors worth considering:
Thermaltech Commander FT ($ 40): A touch-screen fan controller, the Thermaltech Commander FT features a 5.5-inch display that gives you temperature readout for multiple channels and will closely monitor your CPU while controlling multiple fans to keep your system cool.
Kingwin Performance FPX-007 ($ 35): Often on sale for cheap, the Kingwin fan controller lets you keep track of five temperatures, including the CPU, as well as control five different fans. There should even be a built-in alarm that your CPU is too hot at any point.
Aerocole Fan V12XT Fan & Temperature Controller ($ 37): Aerocoal’s monitor with its touchscreen LCD display can control four sets of fans and temperature readings. The display can control fan settings, show temperature, and allow you to specify at what temperature you want the alarm to sound.
On a mac? Try tg pro
If you have a Mac, we highly recommend the TG Pro instead. This excellent application is a great way to monitor internal temperatures and look for danger signals. It is notarized by Apple and can also be used for direct fan control. Developers are also good at making sure that the app keeps up with the latest MacOS updates. You can learn more and download it here.
Editors recommendations